![]() ![]() If oil contaminates the BB magazine inside the front part of the barrel shroud, if you care about accuracy it has to be cleaned out. Same for the piston seal- blot with paper towels. Use paper towels to blot the barrel seal of excess oil after its saturated- wad it up and push it against the barrel seal with a wooden dowel. The whole routine can take several days if the seals are really dry. ![]() But only use a little at a time, allowing it plenty of time (hours) to soak in between applications. Same thing for the barrel seal, although getting oil on the seal can be tricky- dripping it down the inside of the gun seems to go everywhere except the seal, but as long as the oil hits the walls of the compression chamber, it'll reach the barrel seal. One way around all the mess and to have the best chance of maintaining accuracy is to disassemble the gun and with the plunger in hand, apply oil sparingly to the piston seal allowing it to soak in between applications. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |